Patch Kit Installation

To install Patch kit on Invictus Off Road MOLLE accessories follow below steps.  

  1. Lace 7 Loop Velcro strips through MOLLE webbing all starting at the same horizontal row.
  2.  3 Rows of MOLLE down, weave 1 of the ONE Wrap strips in-between the Loop Velcro strips. 
  3. Go to the top row from step 1 and weave a second ONE Wrap strip starting on an opposite Loop Velcro from step 2.
  4. Repeat steps 1-3 on bottom section. 
  5. Tuck excess loop Velcro into MOLLE webbing.
  6. Trim excess ONE wrap

(see photos below) 

Weave 1" loop through MOLLE PannelWeave one wrap through 1" loop

Once material is weaved trim excess one wrap, and tuck ends of loop into MOLLESemi Installed Patch Kit